All in a box--Summing/MicPre/Pre榮獲FutureMusic白金賞

Fat Track真空管音樂製作套件，是對於過帶、summing、監聽的完全性解決方案！

Fat Track乃設計來作為任何家庭、專業或準專業錄音室的核心系統，它將許多TL Audio產品為人稱道的特點整合進這台輕便的設備，為您的錄音或混音作品增加管機的暖度以及聆聽的快感！

 您可以使用Fat Track的優質TL Audio真空管前級與3段式EQ來進行錄音，或利用4組的立體聲與2組的單聲道訊號往返來混音與Summing。 

具備可切換喇叭的模式、2組配有獨立音量調節的耳機訊號輸出、效果訊號往返、所有輸入軌和主輸出都有平衡式的訊號插入(Insert)端子、錄音輸出(tape out)、備有+4/-10的I/O切換，Fat Track備齊了完整優質的性能方便您進行主控或監聽。

所有接口都配置在本產品的正面上方，讓您得以簡單而快速的變換接線；亦可搭配TL Audio DO-8 ADAT 介面可幫您更方便進行數位訊號的連結。

 專為音樂製作人、樂手、歌手/創作者、工程師、各級玩家所設計，Fat Track的性能可滿足您所有的需求，輕鬆上手並製作出更美好而專業的作品。

硬體規格介紹：

l          麥克風、線性及樂器輸入

l          所有輸入端皆有3段可調式EQ

l          2組真空管平台

l          各軌和主輸出皆有平衡式輸入點

l          效果訊號傳送/往返

l          幻象電源、30db 衰減 、相位反轉

l          4組立體聲訊號往返〈DAW/tape returns〉可切換+4/-10

l          2組具備獨立音量控制之耳機輸出

l          可選擇式喇叭模式

l          主音量輸出控制旋鈕

l          平衡式I/O +4/-10

l          相容於TL Audio DO-8 ADAT介面

l          規格：

Width = 383mm Depth Top Plate = 280mm Depth Side = 300mm (+ Transformer at Rear = 45mm) Height Back = 143mm Height Front = 83mm (+ Feet = 10mm) 

詳細規格表 

2 Input Channels (figures quoted to Direct Outputs with Fader at maximum):
線性輸入:	Balanced, via 3 pin TRS jack.
	Nominal Level +4dBu, Gain range +/-20dB.
	Frequency Response 10Hz to 40KHz, +/-0.4dB.
	Maximum Input Level +22dBu.
	Noise -83dBu unweighted, 22Hz to 22KHz.
麥克風輸入:	Balanced, via 3 pin XLR.
	Gain range +16dB to +60dB (-14dB to +30dB with pad).
	Input Noise (EIN) -127dBu, 22Hz to 22KHz @ 60dB gain, 150R.
	Frequency Response 10Hz to 40KHz, +/-0.5dB, @ 40dB gain.
	Maximum Input Level +6dBu (+36dBu with pad).
	Switchable 48V Phantom Power.
樂器輸入:	Unbalanced 0.25” jack.
	Nominal input -16dBu, Gain range +/-20dB.
	Maximum Input Level +8dBu.
	Frequency Response 10Hz to 40KHz, +/-0.5dB.
	Noise -83dBu unweighted, 22Hz to 22KHz.
直接輸出:	Post EQ and Fader, Pre Mute Switch.
	Balanced, via 3 pin TRS jack.
	Nominal Level +4dBu.
	Maximum Level +22dBu.
所有輸入:	Phase Reverse Switch.
	Switchable High Pass Filter, -3dB @ 90Hz, 2nd order.
等化器:	“High” +/-15dB @ 10KHz.
	“Mid” +/-15dB, swept 150Hz to 7KHz, Q =0.7.
	“Low”+/-15dB @ 80Hz.
Tube Stage:	Pre EQ.
Drive LED:	Variable intensity, from 0dBu to +12dBu, indicating increasing
	Tube drive. Distortion is predominately 2nd Harmonic, increasing
	with Drive LED from 0.5% to 3% (typical).
Peak LED:	Illuminates at +19dBu.
	Multiple point monitoring at Input stage and post EQ.
插入點:	Post EQ, Pre Fader.
	Semi-balanced Send, balanced Return, on separate 3 pin TRS jacks.
	Bypass switch.
	Nominal Level -2.7dBu.
FX Send:	Post EQ, Fader and Mute switch.
	Variable send level.
Routing:	To Main L+R stereo mix, via pan pot (-3dB at centre) and mute
	switch.
Four 2-Track Returns:
推桿:	Rotary, 0dB maximum gain.
輸入:	Balanced, via 3 pin TRS jacks.
	Nominal Level individually switchable +4dBu/-10dBu.
	Maximum Input Level +22dBu.
Routing:	To Main L+R stereo mix, via Fader and routing switch.
Main Outputs:
Fader:	Rotary, +10dB maximum gain.
Tube Stage:	Post Mix Amps.
XLR Outputs:	Balanced, nominal level +4dBu.
	Maximum level +26dBu.
	Noise, all faders @ 0dB, -80dBu, 22Hz to 22KHz.
	Noise, Main Fader @ minimum, -95dBu, 22Hz to 22KHz.
Jack Outputs:	Unbalanced, nominal level -10dBu.
Tape Output:	Combined TRS jack, nominal level -16dBu.
Inserion Point:	Pre Fader.
	Semi-balanced Send, balanced Return, on separate 3 pin TRS jacks.
	Bypass switch.
	Nominal Level -2.7dBu.
FX Send:
Output:	Mono, semi-balanced, via 3 pin TRS jack.
	Nominal level -6dBu.
	Noise -87dBu, channel sends @ maximum.
	Noise -100dBu, channel sends @ minimum.
FX Returns:
Inputs:	Stereo, Right Input normalled to Left Input for Mono compatibity.
	Balanced, via 3 pin TRS jacks.
	Nominal level +4dBu.
	Maximum Input Level +22dBu.
Monitoring:
Source:	Normally follows Main Output, overridden by 2-Track AFL
	selection.
	Level controlled by large diameter knob.
	Main / Alt LS switch.
	LS Mute switch.
LS Outputs:	Main and Alt LS, balanced on 3 pin TRS jacks.
	Nominal Level +4dBu.
	Maximum Level +26dBu.
	Noise -80dBu, all faders @ 0dB.
	Noise -100dBu, Monitor Fader @ minimum or LS muted.
Phones Outputs:	2 stereo outputs, with separate level controls.
	Phones 1 follow Monitor selection, for Engineer/Producer.
	Phones 2 follow Main Output at all times, for Artist.
	3 pin TRS jacks.
	Minimum Impedance 32 ohms.
Digital I/O:	Optional DO-8/Firewire cards available, to fit slot on rear panel.
Dimensions:	381mm W x 330mm D x 150mm H. (15” x 13” x 6” approx).
Power Requirements:
Voltage:	230V 50Hz or 115V 60Hz, internally wired.
Consumption:	37VA, without digital I/O.
	41VA, with DO-8 option fitted.
Notes:
Semi-balanced outputs on 3 pin TRS jacks are wired as:
	Tip = Signal +, Ring = Signal 0V Ref, Sleeve = GND.
Following equipment should be wired as:
	Tip = Signal +, Ring = Signal -, Sleeve = GND (balanced),
or:
	Tip = Signal +, Ring = no connection, Sleeve = GND (unbalanced).
These specifications are typical figures, subject to normal production tolerances. They do not represent guaranteed limits for any particular piece of equipment. Specifications are subject to change without notice.