MidiMall引進歐洲原廠原設計的BlueMic--JZ Snow系列
![]()
![]()
|
PRODUCTS -> ”JZ-2” professional electrostatic studio microphone
|
|
|
![]() |
![]() |
| |
A high-end class electrostatic studio microphone which is the result of years of experience in leading studio microphone restoration, design and manufacturing, and merging it with the latest technologies and the highest qualification handcraft work.
|
![]() |
![]() |
| |
“JZ-2” model uses unidirectional large size single diaphragm capsule. Microphones sound conception is based on vintage tone with some modern add of transparent highs, optimal vocal presence and fundamental and concrete low frequency register.
|
![]() |
![]() |
| |
Frequency diagram provides overall character of “JZ-2” microphone, but how the concrete unit reacts in concrete application depends on a number of external factors - room volume, reflections, reverberation, microphone distance and angle from sound source and room walls, floor and ceiling, microphone external pre-amplifier’s input’s impedance, electronics type and quality, microphone cable length and quality, etc. But the basis of sound comes from know-how of artist and engineer !
|
![]() |
![]() |
| |
SPECIFICATIONS:
Transducer type electrostatic
Operating principle pressure gradient
Diaphragm’s active diameter 26 mm
Frequency range 20 Hz to 20 kHz
Polar pattern unidirectional, cardioid
Output impedance 50 ohms
Rated load impedance 1000 ohms
Suggested load impedance > 500 ohms
Sensitivity at 1000 Hz into 1000 ohms load 21.5 mV/Pa
S/N Ratio CCIR 468-3 weighted 76.5 dB
S/N Ratio DIN/IEC 651 A-weighted 87.5 db-A
Equivalent noise level DIN/IEC A-weighted 6.5 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load 134.5 dB
Dynamic range of the microphone preamplifier 128 db
Phantom powering voltage on pins 2 & 3 of XLR +48 V (+4/-6 V)
Current consumption < 2 mA
Output connector 3-pin XLR male, gold plated contacts
Signal polarity positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
Dimensions and Weight 165 x 102 x 68 mm, 780 g
|
|
|
|
|
PRODUCTS -> ”JZ-4” professional electrostatic studio microphone
|
|
| |
|
![]() |
|
A high-end class electrostatic studio microphone which is the result of years of experience in leading studio microphone restoration, design and manufacturing, and merging it with the latest technologies and the highest qualification handcraft work.
|
| |
|
|
| |
|
|
“JZ-4” model uses unidirectional large size single diaphragm capsule. Microphones sound conception is based on vintage tone with some modern add of transparent highs, optimal vocal presence and fundamental and concrete low frequency register.
|
| |
|
|
| |
|
|
Frequency diagram provides overall character of “JZ-4” microphone, but how the concrete unit reacts in concrete application depends on a number of external factors - room volume, reflections, reverberation, microphone distance and angle from sound source and room walls, floor and ceiling, microphone external pre-amplifier’s input’s impedance, electronics type and quality, microphone cable length and quality, etc. But the basis of sound comes from know-how of artist and engineer !
|
| |
|
|
SPECIFICATIONS:
Transducer type electrostatic
Operating principle pressure gradient
Diaphragm’s active diameter 26 mm
Frequency range 20 Hz to 20 kHz
Polar pattern unidirectional, cardioid
Output impedance 50 ohms
Rated load impedance 1000 ohms
Suggested load impedance > 500 ohms
Sensitivity at 1000 Hz into 1000 ohms load 21.5 mV/Pa
S/N Ratio CCIR 468-3 weighted 76.5 dB
S/N Ratio DIN/IEC 651 A-weighted 87.5 db-A
Equivalent noise level DIN/IEC A-weighted 6.5 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load 133.5 dB
Dynamic range of the microphone preamplifier 127 db
Phantom powering voltage on pins 2 & 3 of XLR +48 V (+4/-6 V)
Current consumption < 2 mA
Output connector 3-pin XLR male, gold plated contacts
Signal polarity positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
Dimensions & weight (w shock-mount) 242x103x112 mm, 620 g
|
|
| |
|
OPTIONAL ACCESSORIES
V-MC microphone cable
|
|
|
|
PRODUCTS -> ”JZ-6” professional electrostatic studio microphone
|
|
|
![]() |
![]() |
| |
A high-end class electrostatic studio microphone which is the result of years of experience in leading studio microphone restoration, design and manufacturing, and merging it with the latest technologies and the highest qualification handcraft work.
|
![]() |
![]() |
| |
“JZ-6” model uses unidirectional large size dual diaphragm capsule. Microphones conception is natural, very detailed sound - with transparent highs, smooth vocal presence and close to linear low end response.
|
![]() |
![]() |
| |
Frequency diagram provides overall character of “JZ-6” microphone, but how the concrete unit reacts in concrete application depends on a number of external factors - room volume, reflections, reverberation, microphone distance and angle from sound source and room walls, floor and ceiling, microphone external pre-amplifier’s input’s impedance, electronics type and quality, microphone cable length and quality, etc. But the basis of sound comes from know-how of artist and engineer!
|
![]() |
![]() |
| |
SPECIFICATIONS:
Transducer type electrostatic
Operating principle pressure gradient
Diaphragm’s active diameter 27 mm
Frequency range 20 Hz to 20 kHz
Polar pattern unidirectional, cardioid
Output impedance 50 ohms
Rated load impedance 1000 ohms
Suggested load impedance > 500 ohms
Sensitivity at 1000 Hz into 1000 ohms load 33.5 mV/Pa
S/N Ratio CCIR 468-3 weighted 77.5 dB
S/N Ratio DIN/IEC 651 A-weighted 88.5 db-A
Equivalent noise level DIN/IEC A-weighted 5.5 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load 133.5 dB
Dynamic range of the microphone preamplifier 128 db
Phantom powering voltage on pins 2 & 3 of XLR +48 V (+4/-6 V)
Current consumption < 2 mA
Output connector 3-pin XLR male, gold plated contacts
Signal polarity positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
Dimensions and Weight 222 x 45 mm, 360 g
|
|
|
|
